|
Ku-Band Tracking Solution / AL-1200 Systems
|
|
AL-1200 series systems constitute a lightweight, self-contained elevation-over-azimuth tracking solution for Ku-band links. This portable system may be ground-based or shipboard (with additional stabilization) and is ideal for short range applications such as UAV control and data link.
|
|
|
L/S-Band Tracking Solution / AL-1600 Systems
|
|
AL-1600 series systems constitute, self-contained elevation-over-azimuth tracking solution for L/S-band links. This flexible system may be ground-based, transportable, or shipboard (with additional stabilization) and can serve a wide range of medium range applications such as UAV command and control, aircraft flight test and missile telemetry.
|
|
|
L/S-Band Tracking Solution / AL-1800 Systems
|
|
AL-1800 series systems constitute a self-contained elevation-over-azimuth tracking solution for L/S-band links. This flexible system may be ground-based, transportable, or shipboard (with additional stabilization) and can serve a wide range of medium range applications such as UAV command and control, aircraft flight test and missile telemetry.
|
|
|
L/S-Band Tracking Solution / AL-3400 Systems
|
|
AL-3400 series systems constitute a self-contained elevation-over-azimuth tracking solution for L/S-band links. The system may be ground-based, transportable, or shipboard (with additional stabilization) for applications such as satellite imaging, high-altitude flight tests or long-range missile tracking.
|
|
|
L/S-Band Tracking Solution / AL-4800 Systems
|
|
AL-4800 series systems constitute a self-contained elevation-over-azimuth tracking solution for L/S-band links. The system may be ground-based, transportable, and even shipboard (with additional stabilization) for applications such as satellite imaging, high-altitude flight tests or long-range missile tracking.
|
|
|
|
Positioner System / AL-20-1MOD
|
|
The AL-20-1MOD is a compact and cost effective tracking pedestal for portable and fixed ground solution.
The positioner elevation over azimuth drive is based on a 24V DC brush motor integrated with a suitable gear train to achieve the required output velocity and the necessary torque to move up to 1m diameter antenna under the specified wind conditions.
|
|
|
Digital Tracking Pedestal Solution / AL-4012
|
|
AL-4012 is orbit’s new generation lightweight, high-dynamic elevation-over-azimuth Digital Tracking Pedestal, equipped with brushless servomotors and a planetary gearbox as well as an absolute encoder for each axis. High accuracy - can be hand carried by two persond if needed.
|
|
|
Digital Tracking Pedestal System / AL-4016
|
|
The AL-4016 is orbit’s new generation lightweight, high-dynamic elevation-over-azimuth Digital Tracking Pedestal, equipped with brushless servomotors and a planetary gearbox as well as an absolute encoder for each axis. For high accuracy.
|
|
|
|
|
|
|
Indoor Tracking Controller / AL-4000
|
|
Orbit’s Antenna Control Unit (ACU) model AL-4000 (indoor unit) is an advanced tracking controller, designed to provide overall control of tracking antenna motion, display position and tracking data.
|
|
|
Outdoor Tracking Controller / AL-5005-3T
|
|
Orbit’s Antenna Control Unit (ACU) model AL-5005-3T (outdoor unit) is an advanced tracking controller, designed to provide overall control of tracking antenna motion, display position and tracking data.
|
|
|
|
Digital Servo Amplifier / DSA
|
|
The Digital Servo Amplifier (DSA) is a new generation of the servo driver for brushless motors with sinusoidal as well as trapezoidal commutation. The DSA is able to close not only motor current loop, but also velocity and position loops providing overall control of a servo axis.
|
|
|
Dual Digital Servo Amplifier / DDSA
|
|
Orbit’s AL-2006-DDSA-1A Dual Digital Servo Amplifier (DDSA) is a Digital servo driver for brushless motors. It drives both axes of the pedestals.
The DDSA is a DSP-based unit responsible for motor current, motor velocity and axis position control loops as well as comprehensive build-in test (BIT) of the entire pedestal.
The DDSA supports several digital serial interfaces: UART, SPI and CAN bus.
|
|
|
|
RCU Remote Control Unit / AL-2005
|
|
The AL-2005-RCU is an Ultra compact, cost effective Hand-Held Remote Control Unit designed to manually control and display the position of an Elevation over Azimuth Digital Tracking pedestals.
The RCU is ideal for service technicians and/or applications requiring manual operation only.
However, the RCU can be also connected to a host computer via RS422 comm. link while switching the” Local/Remote” switch to “Remote position”.
|
|
|
Hand-Held Remote Control Unit / AL-2005-LCU
|
|
The AL-2005-LCU is an Ultra compact, cost effective Hand-Held Remote Control Unit designed to manually control and display the position of Elevation over Azimuth Digital Tracking pedestals.
The LCU is ideal for service technicians and/or applications requiring manual operation only.
|
|
|
|
|
|
Airborne Tracking Antenna Positioner / AL-1610-1E EL/AZ
|
|
Airborne Tracking Antenna System for air to ground data-link on an aircraft, in order to provide 360º coverage. The system incorporates two antennas per aircraft, one of which is mounted in the tail-cone and the other in the forward belly radome. The antenna is a parabolic 10” dish with a vertically polarized feed for 10.7 to 11.7 GHz frequency range.
|
|
|
Ultra-Light EL/AZ / AL-1612-1
|
|
Airborne ultra-light multi positioner system, consisting of 3 gimbals AL-1612-1, all controlled by a single controller AL-1612-3.
|
|
|
Airborne MM Wave / AL-1615-1
|
|
Airborne Satellite Tracking Antenna System for communication with satellite.
The positioner supports a flat plate antenna, uniquely designed to require minimal radome volume. The control system tracks a geosynchronous satellite while subjected to the aircraft’s dynamic movements.
|
|
|
|
|
